Cylinders

Calgaz Cylinders

1AL

Calgaz offers two aerosol type gas cylinders used where the quantity of gas required is small. The 1ALE is supplied with a screw type valve and requires a regulator from the FF20 range to be fitted to regulate flow and replaces the 12DA cylinder. The 1ALU is supplied with a plastic trigger mechanism allowing an unregulated flow of gas to be released and replaces the 1AL cylinder. This product is approved globally.

See Datasheet

2AL

Calgaz has a range of three types of 2AL aluminium cylinders designed to meet your needs. The 2ALE and 2ALU are both approved for global use and vary only slightly in terms of height, appearance and weight. The 2ALR is our refillable cylinder version which can only be supplied in the USA.

See Datasheet

8AL

Calgaz has two types of 8AL aluminium cylinders designed to meet your needs. The 8ALE and 8ALU are both approved for global use and vary only slightly in terms of appearance and weight.

See Datasheet

10AL

Calgaz has a range of three types of 10AL aluminium cylinders designed to meet your needs. The 10ALE and 10ALU are both approved for global use and vary only slightly in terms of height, appearance and weight. The 10ALR is our refillable cylinder version which can only be supplied in the USA.

See Datasheet

5ELR

The 5ELR is a globally approved aluminium cylinder. The 625 litres nominal gas capacity means the cylinder is ideal when larger volumes of gas are required. The cylinder can be supplied with a range of CGA valves designed to meet your specific needs. The cylinder can be filled with non-reactive gases.

See Datasheet

6D & 6DM

The 6D and 6DM are globally approved steel cylinders. These cylinders are ideally suited for non-reactive gas use. In addition steel cylinders are often specified for use in Mines and other explosive atmospheres (please check regulations). The 6D cylinder holds 103 litres nominal gas capacity and the 6DM being more compact 58 litres of gas.

See Datasheet

7HP & 7EOC

Calgaz supplies calibration gas in two types of small steel cylinder. The 7HP contains 34 litres of gas and the 7EOC contains 17 litres of gas. Each cylinder type is fitted with a CGA 600 valve. The cylinders can be supplied worldwide with the exception of Europe and are used for non reactive gases only when small volumes are required.

See Datasheet

65ALR

The 65ALR is a globally approved aluminium cylinder. The 850 litres nominal gas capacity means the cylinder is ideal when larger volumes of gas are required. The cylinder can be supplied with a range of CGA valves designed to meet your specific needs. The cylinder can be filled with both non-reactive and reactive gases.

See Datasheet

Eco-Bump

The Eco-Bump cylinder is a small handy lightweight cylinder available globally. The cylinder can be filled with reactive Quad mixtures including H2S, CO, CH4, O2 in N2 and non-reactive gases. The cylinder contains enough gas for up to 250 Bumps of 3 seconds each.

See Datasheet

High Pressure Cylinders (HPC)

Calgaz is able to supply a limited range of gas mixtures in High-Pressure refillable Cylinders (HPC) globally in addition to its non-refillable cylinder product offering from the Stoke, UK plant. The mixtures offered cover a wide variety of applications including Gas Detection, Industrial Safety, Breath Testing (BrAC), Mud Logging and Marine.

See Datasheet